top of page

ODIN WORKS BCG'S

arrow&v
pk-os-abs-lite-223-bcg-lm-2T.jpg

Low Mass BCG with an AR-15 Adjustable Buffer - Lite

Price: $228.00

Stock Status: In Stock
Product Code: PK-OS-ABS-LITE-223-BCG-LM

Reduce your recoil and the disturbance of your rifle with our Low Mass BCG and AR-15 LITE Adjustable Buffer. Our Low Mass BCG weighs in at only 9oz, drastically reducing the amount of mass reciprocating in your rifle. It features a Salt Bath Nitride finish that is both slick and durable. The carrier is made from 8620 steel and the bolt from 9310 steel and is compatible with .223/5.56 and .300 blackout calibers.

The LITE Adjustable buffer gives you the ability to change the weight of your buffer so that you can fine tune how your buffer interacts with your BCG. It comes with 3 aluminum and 3 stainless steel weights, and 1 tungsten weight too so you can make adjustments to your rifle so it shoots and feels just right.
 

pk-osabslite-bcg-lm-adj-atlas5-2T.jpg

No Recoil, High Performance Package!

Price: $406.00

Stock Status: In Stock
Product Code: PK-OSABSLITE-BCG-LM-ADJ-ATLAS5

What do you get with a ODIN Works Low Mass BCG, LITE Adjustable Buffer, Atlas 5 Compensator, and Adjustable Gas Block? NO RECOIL! Okay well maybe you'll have a tiny bit, but it's seriously reduced.

If you want a high performing rifle without totally rebuilding yours, this High Performance Package is for you. Our Low Mass BCG weighs in at only 9oz, drastically reducing the amount of mass reciprocating in your rifle. It features a Salt Bath Nitride finish that is both slick and durable. The carrier is made from 8620 steel and the bolt from 9310 steel and is compatible with .223/5.56 and .300 blackout calibers.

The LITE Adjustable buffer gives your the ability to customize your rifle and adjust it to the specifications you require. It comes with 3 aluminum and 3 stainless steel weights, and 1 tungsten weight too so you can make adjustments to your rifle so it shoots just right.

A muzzle device not only looks great, but our line of Atlas compensators are truly unique. It's 3-piece design makes installation simple and fast. And the best part is the timing and tuning is done with the titanium sleeve that can be rotated, rather than shims or crush washers that traditional compensators use. This package includes the Atlas 5 Compensator.

Last but not least, get ultimate fine tuning adjustments from our .750" Adjustable Gas Block. With 20 ball detent adjustments and no set screws needed. Getting your rifle to cycle perfectly has never been quicker or easier.

ACC-6.5-BCG-2T.jpg

6.5 Grendel Type 2 Black Nitride Bolt Carrier Group

Price: $149.00

Stock Status: In Stock
Product Code: ACC-6.5-BCG

As an essential part of any rifle, the ODIN Works 6.5 Grendel, Type 2 bolt face is Mil-Spec and comes with a Case Hardened 8620 Steel Black Nitride Finish. This advanced low friction coating minimizes the need for lubricants. 4130 Steel Gas Key attached with Grade 8 hardware and properly staked into a milled “valley” to ensure proper positioning. Don't skimp on an essential part of your build, go with only the best.

Features

  • Type 2 6.5 Grendel bolt face.

  • True Mil-Spec Bolt Carrier Group

  • Material: Case Hardened 8620 Steel

  • Finish: Black Nitride. This advanced low friction coating minimizes the need for lubricants.

  • Gas Key: 4130 Steel attached with Grade 8 hardware and properly staked into a milled “valley” to ensure proper positioning.

  • Cam Pin: Hardened 4340 cam pin

  • Firing Pin: Mil Spec firing pin made of 8740 steel, center-less ground and Hard Chrome coated

  • Bolt Assembly: The Bolt is “true” Mil Spec dimension and external surfaces are CNC ground after heat treat for a precision fit.

  • Bolt Material: Case Hardened 9310 Steel.

  • Finish: All Bolt components Shot Peened and Manganese Phosphate or Black Nitride

  • Extractor: 4340 Steel , Manganese Phosphate coated

  • Mil Spec Extractor Spring & O-Ring Combination

  • MPI: Magnetic Particle Inspected

  • HPT: High Pressure Test

  • Made in USA

ACC-223-BCG-2T.jpg

223 Black Nitride Bolt Carrier Group

Price: $129.00

Stock Status: In Stock
Product Code: ACC-223-BCG

As an essential part of any rifle, the ODIN Works .223 Black Nitrided, Type 2 bolt face is Mil-Spec and comes with a Case Hardened 8620 Steel Black Nitride Finish. This advanced low friction coating minimizes the need for lubricants. 4130 Steel Gas Key attached with Grade 8 hardware and properly staked into a milled “valley” to ensure proper positioning. Don't skimp on an essential part of your build, go with only the best.

Features

  • Mil-Spec dimensions

  • Bolt Carrier Group Material:

  • Case Hardened 8620

  • Steel Finish: Black Nitride.

  • This advanced low friction coating minimizes the need for lubricants.

  • Gas Key: 4130 Steel attached with Grade 8 hardware and properly staked into a milled “valley” to ensure proper positioning.

  • Cam Pin: Hardened 4340 cam pin

  • Firing Pin: Mil Spec firing pin made of 8740 steel, center-less ground and Hard Chrome coated

  • Bolt Assembly: The Bolt is “true” Mil Spec dimension and external surfaces are CNC ground after heat treat for a precision fit.

  • Bolt Material: Case Hardened 9310 Steel.

  • Finish: All Bolt components Black Nitride

  • Extractor: 4340 Steel Mil Spec

  • Extractor Spring & O-Ring Combination

  • MPI: Magnetic Particle Inspected

  • HPT: High Pressure Test

  • Made in USA

  • Carrier fits AR15/M4 compatible style Rifles (i.e.) .223/5.56mm, .300 Blackout

LOW Mass 223 Black Nitride Bolt Carrier Group

Price: $179.00

Stock Status: In Stock
Product Code: ACC-223-BCG-LM

ACC-223-BCG-LM-2T.jpg

This BCG from ODIN Works is a High Performance* part that will change the way your rifle feels and shoots. This BCG has been significantly lightened, weighing in at only 9 ounces, it dramatically changes the amount of mass reciprocating in your gun. This BCG also features a Salt Bath Nitride finish that is both slick and durable. The carrier is made from 8620 steel and the bolt from 9310 steel.

Bolt Carrier Group fits AR15/M4 compatible style Rifles (i.e.) .223/5.56mm, .300 Blackout.

*This is a HP or High Performance part. It will change how your rifle feels and shoots. Tuning may be required to make the gun properly run with this part. This can be done via the gas system or the buffer system.

PK-6.5-BOLT-FP-2T.jpg

6.5 Grendel Bolt with Firing Pin

Price: $99.00

Stock Status: In Stock
Product Code: PK-6.5-BOLT-FP

ODIN Works 6.5 Grendel, Type 2 bolt face is Mil-Spec and comes with a Case Hardened 8620 Steel Black Nitride Finish. This advanced low friction coating minimizes the need for lubricants. 4130 Steel Gas Key attached with Grade 8 hardware and properly staked into a milled “valley” to ensure proper positioning. Don't skimp on an essential part of your build, go with only the best.

Features

  • Type 2 6.5 Grendel bolt face.

  • Finish: Black Nitride. This advanced low friction coating minimizes the need for lubricants.

  • Gas Key: 4130 Steel attached with Grade 8 hardware and properly staked into a milled “valley” to ensure proper positioning.

  • Firing Pin: 6.5 Grendel Firing pin made of 8740 steel, center-less ground and Hard Chrome coated

  • Bolt Assembly: The Bolt is “true” Mil Spec Outer dimension and external surfaces are CNC ground after heat treat for a precision fit.

  • Bolt Material: Case Hardened 9310 Steel.

  • Finish: All Bolt components Shot Peened and Manganese Phosphate or Black Nitride

  • Extractor: 4340 Steel, Manganese Phosphate coated

  • Mil Spec Extractor Spring & O-Ring Combination

  • MPI: Magnetic Particle Inspected

  • HPT: High Pressure Test

  • Made in USA

PROUDLY

eagleflag.jpg
bottom of page