ODIN WORKS GAS BLOCKS

arrow&v
GB-ADJ-CLAMP-2T.jpg

Features

  • Not for use with pistol length gas systems.

  • Fits inside all ODIN Works Forends.

  • Fits .750" diameter barrels.

  • Weight: 2.25 oz (includes detent ball, screws and pin).

  • Made from Carbon Steel.

  • Nitride finish. Heat treated Inconel adjustment screw and spring.

  • 20 adjustments.

  • Includes detent ball, cross pin, set screws, and hex wrenches.

    To Disassemble for Periodic Cleaning:

    1. Loosen set screw #1
    2. Loosen and remove screw #2.
    3.Carefully remove spring and detent ball.
    4. Remove gas adjustment screw #3.
    5. Soak in cleaning solvent.

Clamp on Adjustable Low Profile Gas Block

Price: $99.00

Stock Status: In Stock
Product Code: GB-ADJ-CLAMP

The Clamp on Adjustable Gas Block from ODIN Works is truly adjustable and packed with features. Machined from steel and black nitrided for durability, our clamp on adjustable gas block is equipped with a front facing stainless steel adjustment screw and spring to handle high temperatures. 20 clicks of ball detent adjustment, no set screws needed, simply adjust the stainless screw where you want it and you’re done. An adjustable gas block can reduce your recoil, reduce wear, and allow for a variety of different custom options on your rifle. Why would you choose a clamp on adjustable gas block instead of a regular adjustable gas block? Two main reasons are because it won't mark up your barrel like regular set screws might, and you have greater control over the pressure that is applied on the barrel from tightening the gas block, ensuring that it's is evenly distributed.

A traditional, fixed gas block allows a fixed amount of gas to flow through the system. It's a one size fits all solution for rifles with gas systems. A fixed gas block will almost always be over gassed so that it can cycle the rifle with a variety of ammunition and other variables that effect the rifle cycling. However, there are many downsides to having an over gassed rifle. These downsides include excessive recoil, more wear and tear, running hotter and dirtier, and being less reliable, just to name a few.

A solution to all that? Enter the adjustable gas block. With an ODIN Works Adjustable Gas Block, you'll have 20 pre-set micro adjustments to reduce or increase the gas flow on your rifle. This allows you to run just the right amount of gas to cycle your rifle perfectly, while having minimal recoil (increasing accuracy), run more efficiently and cooler, less wear on your rifle, and allowing customizations such as running different bolt carrier groups, different buffer weights, adding a suppressor, or running different ammunition.

Simply put, an adjustable gas block is one of, if not the most effective way to improve how your rifle runs for the least amount of money.

The ODIN Works clamp on adjustable gas block will fit any barrel with .750" diameter and works with any caliber.

GB-ADJ-.875-2T.jpg

Features

  • NOT FOR USE WITH PISTOL LENGTH GAS SYSTEMS AND HIGH PRESSURE ROUNDS

  • Fits .875" diameter barrels

  • Weight: 2.45 oz (includes detent ball, screws and pin).

  • Made from Carbon Steel.

  • Nitride finish.

  • Stainless steel adjustment screw and spring.

  • 20 adjustments.

  • Includes detent ball, cross pin, set screws, and hex wrenches.

  • Neither compatible with the RUNE nor the RAGNA.

  • To Disassemble for Periodic Cleaning:
    1. Loosen set screw #1
    2. Loosen and remove screw #2.
    3.Carefully remove spring and detent ball.
    4. Remove gas adjustment screw #3.
    5. Soak in cleaning solvent.

.875" Adjustable Low Profile Gas Block

​Price: $89.00

Stock Status: In Stock
Product Code: GB-ADJ-

 

.875 A tunable gas block is great, but the Adjustable Gas Block from ODIN Works has pin point adjustability and is packed with features. Machined from steel and black nitrided for durability, our adjustable gas block is equipped with with a front facing stainless steel adjustment screw and spring to handle high temperatures. 20 clicks of ball detent adjustment, no set screws needed, simply adjust the stainless screw where you want it and you’re done. An adjustable gas block can reduce your recoil, reduce wear, and allow for a variety of different custom options on your rifle.

A traditional, fixed gas block allows a fixed amount of gas to flow through the system. It's a one size fits all solution for rifles with gas systems. A fixed gas block will almost always be over gassed so that it can cycle the rifle with a variety of ammunition and other variables that effect the rifle cycling. However, there are many downsides to having an over gassed rifle. These downsides include excessive recoil, more wear and tear, running hotter and dirtier, and being less reliable, just to name a few.

A solution to all that? Enter the adjustable gas block. With an ODIN Works Adjustable Gas Block, you'll have 20 pre-set micro adjustments to reduce or increase the gas flow on your rifle. This allows you to run just the right amount of gas to cycle your rifle perfectly, while having minimal recoil (increasing accuracy), run more efficiently and cooler, less wear on your rifle, and allowing customizations such as running different bolt carrier groups, different buffer weights, adding a suppressor, or running different ammunition.

Simply put, an adjustable gas block is one of, if not the most effective way to improve how your rifle runs for the least amount of money.

The ODIN Works adjustable gas block will fit any barrel with .875" diameter and works with any caliber.

GB-ADJ-2T.jpg

.936" Adjustable Low Profile Gas Block

​Price: $89.00

Stock Status: In Stock
Product Code: GB-ADJ-.936

 

Features

  • Not for use with pistol length gas systems and high pressure rounds.

  • Fits .936" diameter barrels.

  • Weight: 2.45 oz (includes detent ball, screws and pin).

  • Made from Carbon Steel.

  • Nitride finish.

  • Stainless steel adjustment screw and spring.

  • 20 adjustments.

  • Includes detent ball, cross pin, set screws, and hex wrenches.

  • Neither Compatible with the RUNE nor the RAGNA.

  • To Disassemble for Periodic Cleaning:
    1. Loosen set screw #1
    2. Loosen and remove screw #2.
    3.Carefully remove spring and detent ball.
    4. Remove gas adjustment screw #3.
    5. Soak in cleaning solvent.

GB-ADJ-.936-2T.jpg

.750" Adjustable Low Profile Gas Block

Price: $89.00

Stock Status: In Stock
Product Code: GB-ADJ

Features

  • Not for use with pistol length gas systems and high pressure rounds.

  • Fits inside all ODIN Works Forends.

  • Fits .750" diameter barrels.

  • Weight: 2.10 oz (includes detent ball, screws and pin).

  • Made from Carbon Steel.

  • Nitride finish.

  • Stainless steel adjustment screw and spring.

  • 20 adjustments.

  • Includes detent ball, cross pin, set screws, and hex wrenches.
    To Disassemble for Periodic Cleaning:
    1. Loosen set screw #1
    2. Loosen and remove screw #2.
    3.Carefully remove spring and detent ball.
    4. Remove gas adjustment screw #3.
    5. Soak in cleaning solvent.

GB-TUNE-BLK-2T.jpg

Tunable Low Profile Gas Block | Black Nitride

Price: $59.00

Stock Status: In Stock
Product Code: GB-TUNE-BLK

 

Set it and forget it! Easily achieve perfect gas cycling with our stainless steel, black nitrided tunable low profile gas block. Easily tune your rifle and make adjustments if you're changing ammo or adding a suppressor. This gas block is included with all DI ODIN Works barrels.

Features

  • Included with all DI ODIN Works barrels.

  • Fits inside all ODIN Works Forends.

  • Fits .750" diameter barrels.

  • Weight: 1.90 oz (includes screws and pin).

  • Made from 303 Stainless Steel.

  • Includes cross pin, set screws, steel tuning screws, and wrenches.

  • Set it and forget it!

  •  

GB-TUNE-SS-2T.jpg

Tunable Low Profile Gas Block

Price: $54.00

Stock Status: In Stock
Product Code: GB-TUNE-SS

 

Set it and forget it! Easily achieve perfect gas cycling with our stainless steel tunable low profile gas block. Easily tune your rifle and make adjustments if you're changing ammo or throwing on a suppressor. This gas block is included with all DI ODIN Works barrels.

Features

  • Included with all DI ODIN Works barrels.

  • Fits inside all ODIN Works Forends.

  • Fits .750" diameter barrels.

  • Weight: 1.90 oz (includes screws and pin).

  • Made from 303 Stainless Steel.

  • Includes cross pin, set screws, steel tuning screws, and wrenches.

  • Set it and forget it!

GB-75-2T.jpg

Low Profile Gas Block

Price: $29.00

Stock Status: In Stock
Product Code: GB-75

 

Our low profile gas block is manufactured to ensure the proper function of the gas system. It is engineered to fit inside all ODIN Works free float forends.

Features

  • Fits inside all ODIN Works Forends.

  • Fits .750" diameter barrels.

  • Weight: 1.95 oz (includes screws and pin).

  • Made from Carbon Steel.

  • Nitride finish.

  • Includes cross pin and set screws.

GB-ALUM-2T.jpg

Aluminum Low Profile Gas Block

​Price: $25.00

Stock Status: In Stock
Product Code: GB-ALUM

 

Our low profile gas block is manufactured to ensure the proper function of the gas system. It is engineered to fit inside all ODIN Works free float forends.

Features

  • Fits inside all ODIN Works Forends.

  • Fits .750" diameter barrels.

  • Weight: 1.2 oz (includes screws and pin).

  • Length: 1.9"

  • Made from 6061 aluminum.

  • Anodized finish.

  • Includes cross pin and set screws.

ACC-7-64-BALL-2T.jpg

Adjustable Gas Block 7/64" Ball Wrench

Price: $9.00

Stock Status: In Stock
Product Code: ACC-7-64-BALL

 

This 8" 7/64 Ball Wrench is perfect for adjusting your new ODIN works Adjustable Gas Block without removing your forend. This ball wrench makes it possible to turn socket head screws from any angle.

Features

  • Four our set crew and clamp on adjustable gas block.

  • Fits 6-32 socket head. Overall Length: 8".

  • This is not compatible with our stainless steel tunable gas block.

GB-ADJ-KIT-2T.jpg

Adjustable Gas Block Rebuild Kit

​Price: $20.00

Stock Status: In Stock
Product Code: GB-ADJ-KIT

 

This kit includes all the parts necessary to rebuild your ODIN Works Adjustable Gas Block from the ground up or use for spare parts.

Features

  • Kit includes (as shown):

  • Gas adjustment screw- stainless steel.

  • Detent ball.

  • Detent screw.

  • Compression set screw.

  • Retention set screw.

  • Hex wrenches.

CLICK HERE for sling swivel instruction

All Rights Reserved © Copyright  2008-2025 Timber Butte Outdoors

TBOBumperSticker92010-1-600x130.png

We "Guarantee the Craftsmanship"of the Outlaw Sling for one (1) year from the date of purchase.

PROUDLY

eagleflag.jpg